FeatureBoardby Lewis Valentine

NativeCAD for Automotive: Drivelines, Tolerance Stacks and Thermal Parts Your AI Can Check

Automotive engineering is checking: stacks, fits, torques, clashes. NativeCAD puts those checks in the hands of an AI assistant that also builds the geometry, from a transaxle to a fuel-cell heat exchanger.

Most of the cost in an automotive part is decided before anyone cuts metal, and most late surprises are things a checker could have caught: a stack that does not close, a bolt with no thread engagement, a clash at full suspension travel. NativeCAD is CAD, FEA and CFD software driven by your AI assistant. It builds exact solid models from a description and runs the checks a senior checker would run, on every revision.

A five-speed transaxle case with its ring of flange bolts
The transaxle used for the tolerance stacks and the fastener audit.

What automotive teams do with NativeCAD

  • Model drivelines that actually move. Gears, mates and bearings are solved, not keyframed.
  • Run tolerance stacks and fastener audits across a whole assembly and get a list of what will fail in production.
  • Design thermal hardware for electric and fuel-cell powertrains and check duty, pressure drop and leak paths.
  • Close DFM findings automatically for machined, moulded, sheet-metal and printed parts.
  • Exchange files with your customer's CAD through STEP AP242, Parasolid, IGES and SLDPRT.

A five-speed transaxle, checked the way a checker would

The checks your checker forgets runs tolerance stacks and a fastener audit on a five-speed car transaxle. The results are the kind you want before tooling:

  • 0 clashes across 620 touching part pairs.
  • One stack is out of spec in 99.96% of simulated builds as drawn, and 0% with the spacer picked at assembly.
  • 4 of 4 planted fastener mistakes caught, none missed, no false alarms.
  • 43.42 N·m worked out per VDI 2230 on each of the 16 case flange bolts. The service manual says 44 ± 5 N·m.
620
touching part pairs, 0 clashes
99.96%
of builds out of spec, caught on paper
4 of 4
fastener mistakes found

Differentials and engines with real kinematics

The rear differential is a 3.73:1 spiral bevel set, 41:11 teeth, 59 parts with every bolt modelled. Nothing is keyframed: turn the pinion and the mates move everything else, including the case where one wheel is held. The V12 engine is a 6.0-litre 60° DOHC unit at 89 × 80.4 mm bore and stroke (6002 cc) that runs live with a cutaway, an exploded view and a crank-angle dial. Both are useful as proof that a text-driven model can carry the part count and motion of real powertrain hardware.

A rear differential shown see-through, with the spiral bevel ring gear and pinion inside the housing
The rear differential: a 3.73:1 spiral bevel set driven through its mates.

Thermal parts for electric and hydrogen powertrains

The printed gyroid heat exchanger removes 515 W against 482 W required, at 2.7 kPa air-side pressure drop inside a 5.0 kPa budget, with 0 leak paths between the air and coolant networks, in a 696 g AlSi10Mg part. The hydrogen fuel-cell precooler was generated from a text brief and removes 10.3 kW at 109 g/s of air in a 4.06 kg one-piece print, checked for thermal, structural, vibration and printability.

A compact printed heat exchanger block with ports and mounting feet
The printed gyroid heat exchanger, 696 g in AlSi10Mg.

DFM findings that close themselves

In the DFM design loop, the manufacturability checker proposes the remedy and the assistant applies it. Eight of eight parts passed in three iterations or fewer across machining, injection moulding, sheet metal and additive. The knowledge packs include automotive, motorsport and race-engine rules.

What to ask your assistant

Import this housing STEP and run a tolerance stack from the bearing seat to the cover face.
    Audit every fastener in the assembly: thread engagement, clearance holes, torque.
    Design a coolant manifold for these four ports and check pressure drop at 12 L/min.
    Run the injection moulding checks on this bracket and fix what fails.

Questions automotive engineers ask

Can NativeCAD run a tolerance stack-up analysis?

Yes. The transaxle demo runs statistical tolerance stacks across the assembly and reports the share of simulated builds that fall out of spec, then shows the fix.

Does NativeCAD work with our customer's CAD system?

NativeCAD reads and writes STEP AP242 and reads Parasolid, IGES, SAT and SolidWorks SLDPRT. 150 of 150 exported STEP files were read back by an independent CAD kernel. See STEP interoperability.

What does NativeCAD cost?

A NativeCAD MCP / Modeler seat is $200 per seat per year, or $20 per seat per month, with no metered usage. The evaluation needs no key and no sign-up; export, save and import need a seat key. See pricing.

Does my geometry leave my computer?

NativeCAD runs on your own machine: the kernel and solvers run locally and licence validation is fully offline. Files opened in the browser modeler are never uploaded. Your AI assistant sees what you ask it to work on, under your agreement with its provider.

NativeCAD in other industries


NativeCAD is CAD, FEA and CFD software your AI assistant drives over MCP, from Claude, Cursor or your own agent, and in the browser. Every part is an exact B-rep solid that exports as STEP AP242. See what it does, browse every demo, check pricing, or install it.

← Previous Post
NativeCAD for Drone Manufacturers: Airframe, Airflow and Every Revision Checked
Next Post →
NativeCAD for Motorsport: More Design Iterations Between Races