FeatureBoardby Lewis Valentine

NativeCAD for Defense and Regulated Manufacturing: AI-Built Parts Inside Your Own Boundary

Regulated manufacturers want AI-assisted engineering and cannot send controlled geometry to a public cloud. NativeCAD runs inside your boundary with no route to the internet, and comes with the deployment guide and control map.

Suppliers handling controlled technical data are told two things at once: adopt AI to keep up, and do not let the drawings leave the building. Most AI design tools are cloud services, which ends the conversation. NativeCAD is CAD, FEA and CFD software that an AI assistant drives, and it runs on your own machines. The kernel, the solvers and the licence check all work with the network cable pulled.

The NativeCAD modeler showing a part on screen
The NativeCAD modeler, as deployed inside the boundary.

What regulated teams do with NativeCAD

  • Run AI-driven CAD inside an accredited boundary with a model hosted in that boundary.
  • Keep geometry on your infrastructure. The software has no route to the internet.
  • Map responsibilities for CMMC Level 2 with a published control map.
  • Release model-based definition as STEP AP242 with PMI and 3D PDF.
  • License without a phone-home. Validation is fully offline.

Zero routes to the internet

NativeCAD for defense describes the deployment: 0 routes from NativeCAD to the internet, driven by Claude on Amazon Bedrock inside AWS GovCloud. The assistant that builds your parts is a model endpoint inside the same boundary as the data. The GovCloud deployment guide is the reference architecture to hand your infrastructure team.

0
routes from NativeCAD to the internet
Offline
licence validation, no phone-home

A CMMC Level 2 responsibility map

The CMMC Level 2 / NIST SP 800-171 responsibility map goes control by control and states who is responsible: the software, the hosting environment or your organisation. It is the document your compliance lead will ask for first, and it is published.

Licensing that works in an enclave

Per the pricing page, validation is fully offline, with no phone-home and no runtime kill-switch. Pricing is flat per seat, with no metered agent compute and no usage component, so there is no usage telemetry to approve. For products that embed the kernel, the AI-native kernel page puts it this way: your customers' geometry never leaves your infrastructure.

The engineering is the same inside the boundary

NativeCAD does the same engineering inside the boundary as outside it. Examples from the public demos: the turbine blade checked by four solvers, the compressor casing with 158 holes in one watertight solid, metal AM build prep in 116 s, and tolerance stacks and fastener audits on a full transaxle. See NativeCAD for aerospace and turbomachinery for the full list.

A compressor casing with rows of spindle bores around its circumference
The compressor casing: the same engineering, inside the boundary.

Model-based definition for the supply chain

NativeCAD reads and writes STEP AP242, where 150 of 150 exported files were read exactly by an independent CAD kernel, and writes 3D PDF for suppliers and inspectors without a CAD seat. Product manufacturing information is authored on the model, so the drawing and the solid do not drift apart.

How a deployment usually starts

1. Read the GovCloud deployment guide and the CMMC responsibility map.
    2. Stand NativeCAD up in a test enclave with a boundary-hosted model.
    3. Run your own acceptance part: import, modify, check, export STEP with PMI.
    4. Decide on seats, or on the Kernel SDK if you are embedding it in a product.

Book a call to talk through your boundary and what your assessor will need.

Questions defense and regulated manufacturers ask

Can NativeCAD run in an air-gapped or GovCloud environment?

Yes. NativeCAD has no route to the internet and validates its licence offline. The published reference deployment drives it with Claude on Amazon Bedrock inside AWS GovCloud.

Is there CMMC documentation for NativeCAD?

Yes. A CMMC Level 2 / NIST SP 800-171 responsibility map is published, stating for each control whether the software, the hosting environment or your organisation is responsible.

What does NativeCAD cost?

A NativeCAD MCP / Modeler seat is $200 per seat per year, or $20 per seat per month, with no metered usage. The evaluation needs no key and no sign-up; export, save and import need a seat key. See pricing.

Does my geometry leave my computer?

NativeCAD runs on your own machine: the kernel and solvers run locally and licence validation is fully offline. Files opened in the browser modeler are never uploaded. Your AI assistant sees what you ask it to work on, under your agreement with its provider.

NativeCAD in other industries


NativeCAD is CAD, FEA and CFD software your AI assistant drives over MCP, from Claude, Cursor or your own agent, and in the browser. Every part is an exact B-rep solid that exports as STEP AP242. See what it does, browse every demo, check pricing, or install it.

← Previous Post
NativeCAD for Simulation Teams: FEA and CFD Set Up and Run by the Agent That Built the Part