FeatureBoardby Lewis Valentine

NativeCAD for CNC Job Shops: From the Customer's Drawing to a Checked Solid

A job shop loses hours before the spindle turns: rebuilding models from PDFs, opening files it has no seat for, and finding the uncuttable corner after the quote went out. NativeCAD gives that work to an AI assistant.

A machine shop's front office does a lot of unpaid CAD. Customers send a PDF drawing with no model, a file from a system the shop does not own, or a model with an internal corner no cutter can reach. NativeCAD is CAD software driven by your AI assistant. It opens the file, rebuilds the model, runs the machining checks and exports STEP for your CAM system, by conversation.

A machined heatsink plate with fins and bosses, built from a manufacturing drawing
A part built from its manufacturing drawing.

What job shops do with NativeCAD

  • Open whatever the customer sends: STEP, Parasolid, SolidWorks, IGES, SAT, meshes.
  • Turn 2D drawings into 3D solids and check the result against the drawing.
  • Run machining DFM before quoting and get the fix along with the finding.
  • Check stacks and fasteners on the assemblies you are asked to build.
  • Make parametric fixtures that change with the part family.

Manufacturing drawings to 3D, checked against NIST

The drawing showcase builds solids from six NIST manufacturing drawings and compares each against the official NIST model: six drawings, six matches. On the spacer, 100.0% of the surface is within 0.1 mm. If your customer sends DXF or a vector PDF, drawing import turns it into a solid and a STEP file with holes as true cylinders and arcs as true arcs.

Open any CAD file, in the browser

Open any CAD file lets you drop STEP, Parasolid, SolidWorks, NX, Inventor or mesh files into the modeler. The file is never uploaded. On the way out, 150 of 150 exported STEP files were read exactly by an independent CAD kernel, and SolidWorks reading is measured on 501 public files.

A machined plate with a bore and slots, opened from a CAD file
A customer file opened in the browser.
6 of 6
NIST drawings matched in 3D
8 of 8
parts pass DFM in 3 rounds or fewer
150 of 150
STEP files verified

DFM that proposes the fix

In the DFM design loop, the manufacturability checker names the problem and the remedy, and the assistant applies it: 8 of 8 parts pass in three iterations or fewer, with 12 fixes applied, all from the checker. For a shop that means a quote reply that says "this pocket needs a 3 mm corner radius, here is the corrected model" instead of a phone call.

Real machined features at scale

The compressor casing has 158 holes cut through, including 72 spindle bores, in one watertight solid. The transaxle checks caught 4 of 4 planted fastener mistakes with no false alarms. In the live modeler, try the CNC fixture plate, which is parametric to the last hole, the shaft features demo with keyways, grooves and shoulders, and the imported NIST CTC-01 test part.

A compressor casing with rows of spindle bores around its circumference
The compressor casing: 158 holes, 72 of them spindle bores.

What to ask your assistant

Open the customer's STEP file and list anything a 3-axis mill cannot cut.
    Build this part from the attached drawing and report where it differs.
    Make a fixture plate for these four parts on a 20 mm grid with M8 holes.
    Give me the volume, mass in 6061 and bounding stock size.

The DFM knowledge packs hold 34 sector packs, including tooling and sheet metal.

Questions CNC job shops ask

Can NativeCAD convert a 2D drawing into a 3D model?

Yes. NativeCAD builds solids from manufacturing drawings and imports DXF and vector PDF directly. Its drawing showcase matches six of six NIST drawings against the official NIST 3D models.

Can I open SolidWorks files without a SolidWorks seat?

Yes. NativeCAD reads SolidWorks SLDPRT files directly, along with STEP, Parasolid, IGES and SAT, and exports STEP AP242 for your CAM system.

What does NativeCAD cost?

A NativeCAD MCP / Modeler seat is $200 per seat per year, or $20 per seat per month, with no metered usage. The evaluation needs no key and no sign-up; export, save and import need a seat key. See pricing.

Does my geometry leave my computer?

NativeCAD runs on your own machine: the kernel and solvers run locally and licence validation is fully offline. Files opened in the browser modeler are never uploaded. Your AI assistant sees what you ask it to work on, under your agreement with its provider.

NativeCAD in other industries


NativeCAD is CAD, FEA and CFD software your AI assistant drives over MCP, from Claude, Cursor or your own agent, and in the browser. Every part is an exact B-rep solid that exports as STEP AP242. See what it does, browse every demo, check pricing, or install it.

← Previous Post
NativeCAD for Robotics and Weld Cell Integrators: Program the Cell From the CAD Model
Next Post →
NativeCAD for Sheet Metal Fabricators: Flat Patterns, Bend Checks and Drawings by Conversation