NativeCAD · implicit vs explicit

Exact where it bolts, lattice where it breathes

A titanium clevis bracket that is lighter than solid and carries every load case, while its bolt bores, pin bore and sealing face stay true geometry: the faces an inspector measures and a mating part touches are the ones in the file.

…lighter than the solid bracket

…worst safety factor across all load cases

…interface faces kept exact in the STEP

…bolt-hole diameter error in the STEP

Three ways to build the same bracket

Version	Mass	Lighter	Worst safety factor	Exact interface faces

Every load case carried

The holes are the holes

…bolt-hole diameter error in the STEP: each bore is the nominal cylinder on the nominal axis

…the same holes measured back off a print mesh of the part, the best a mesh-only file can do

…true position on the bolt pattern, called out on the drawing against the sealing face

Ready for the build plate

Downloads

More demos

All demos →

Metal print prep

A turbine vane ready for the metal printer in under two minutes

Orientation, supports and a full build plate chosen automatically, then graded by an independent checker.

94.8% of overhangs held up 3D nesting

A whole dinner service nested in one SLS build

Bowls inside bowls and plates under plates, every gap proved on the real triangles before the build starts.

30 pieces, one SLS build GE bracket

The GE jet engine bracket, lighter and carrying every load

The classic titanium bracket optimised and offered to print, cast, machine or weld, with STEP to download.

84.3% lighter FEA loop

Finite-element analysis your agent can run

Stress and vibration results from the same AI session that built the part, with the peak and its margin.

6 designs solved in FEA

Build your own part with NativeCAD

Free for education and makers with a registered key · $200 per seat per year · Kernel SDK for products.

Download for Claude Desktop Get a free key Pricing Talk to sales