NativeCAD · 3D printing

Our vehicles, as kits you can print at home.

Every vehicle in the NativeCAD Space Program was modelled in our own CAD kernel. The same kernel turns each one into a print kit: split into parts that each sit flat on a desktop FDM printer's bed, the small ones shaped so nothing overhangs past 45 degrees, with pins, hinges and axles where they belong, or hollowed into a one-piece resin display model.

Ventrix HX

Our own electric hypercar. The kit's butterfly doors swing up on pin hinges and the wheels roll on axles; the resin version is one hollow piece for the shelf.

Drag to turn, pinch or scroll to zoom.

Parts

PartQtySize, mm

Print settings

Print beds

Putting it together

    How a model becomes a kit

    One recipe per model, one pipeline for all of them. The recipe names the scale, where the model splits, which way each part sits on the bed and where the pins, hinges and axles go; the pipeline does the rest and checks every part before it is offered for download.

    Scale to the printer

    The model is scaled to fit a 256 mm FDM bed or a small resin vat, so the same recipe makes both kits.

    One watertight solid

    Hundreds of modelled parts are merged into closed solids a slicer can trust: no holes, no loose shells, no faces inside faces.

    Thin walls made printable

    Anything thinner than the printer can lay down, a mirror stalk or a wing endplate, is thickened to the minimum wall; surface detail on thick panels is left exactly as modelled.

    Supports only where the shape needs them

    Each part sits on a flat face. The small parts are shaped so nothing overhangs past 45 degrees, with a self-supporting chamfer on hidden faces. A large shell like a car body keeps its real undersides and prints with the slicer's supports there, so the visible surfaces stay true to the model. Every part is sliced with automatic supports switched on, and the kit lists which ones need them.

    Fits that work

    Sockets and alignment pins on the cut faces, a hinge pin for each door, hex axles pressed into the wheels, with 0.2 mm running clearance on FDM and 0.1 mm on resin. Each moving part is swept through its full travel and cleared.

    Hollow resin, drained

    The resin model is hollowed to a thin shell with drain holes on the underside, and every cavity is checked to reach a drain so no uncured resin is trapped.

    More demos

    All demos →

    Build your own part with NativeCAD

    Try it free with the keyless evaluation · $200 per seat per year · Kernel SDK for products.